- #Power converter for semi truck install#
- #Power converter for semi truck drivers#
- #Power converter for semi truck professional#
Perhaps it is simplistic to say that after we learned that the fuse had blown, we assume that the inverter we replaced is still good.ĭid we take the newest inverter back for a refund? Now, did we ever check the inverter that we thought had died.
That’s the inverter troubleshooting that we will do the next time something like this happens (which hopefully never will).
Lo and behold, bypassing the fuse allowed the new inverter to work!Īs Mike commented to a fellow truck driver, “Check the little things first.” She suggested bypassing the fuse to see what would happen. Vicki asked Mike some questions about how the connections worked. This illustration shows the inverter connections with cables to the battery or series of batteries. Not too many weeks before, one of the mechanics in the shop at one of Mike’s company’s terminals had installed a fuse between the red cable connecting to the inverter to the batteries. We decided that before we bought another set, we would check one more thing by way of inverter troubleshooting… That One More Thing
#Power converter for semi truck install#
The next day, after having purchased yet another inverter (a 1500 watt Power Drive unit), Mike worked to install it.Īfter making all of the required connections, though, the inverter would not work!Ĭould the power inverter installation kit - the cables that connect the inverter to the batteries - have died?
So, we figured that the inverter had just died and we were going to need to buy a new one.įurthermore, we were going to have to go to the fuss and bother of sending the old one back to the manufacturer because we were already past the 30-day return period for the truck stop where we’d bought it. The photo here shows the plastic sheath around the connection, making it impossible for something to touch where the cable connected to the inverter. The best we can determine, that situation led to the inverter shorting out.īut this time, there was no way that something could get to either connection because each one had a plastic sheath around it to protect it. Something got a little too close to the connection between the inverter and the cable (which connects to the battery). We had had trouble with an inverter before, but figured that one was our fault. Well, so much for homemade mac and cheese! Previous Trouble with an Inverter He needed light to see what was going on under there. It was dark outside, so any attempt on Mike’s part to go out to the battery area under the catwalk behind the truck’s cab to do inverter troubleshooting would have been futile. We opened up the cabinet in the truck where the inverter was housed, thinking that all we needed to do was turn it back on. Less than two minutes into the heating process, our inverter put out a little sound (a beep?) and quit. Just as we had done many times before, we set up our hot pot to boil the pasta. We were looking forward to having macaroni and cheese for dinner. We used ours mostly to save money through cooking our own food.
#Power converter for semi truck drivers#
Some drivers might depend on theirs to power CPAP machines, laptop computers, fans, and other non-12-volt appliances.
#Power converter for semi truck professional#
Like many professional truck drivers, we came to depend on our DC-to-AC inverter to power everything from cell phones to cooking appliances in our trucks. But some later inverter troubleshooting proved it wasn’t the fault of the machine at all.
0 kommentar(er)
